•  
  • e-Catalogue
  • Downloads,
    Services & Support
  • News, Exhibitions
    & Case Studies
  • About Us

The simplicity of
Infrared Remote Control

Remote Control Technology

The EE806 remote control comes with easy-to-use
installer programming & home-owner settings.


Hager's IP55 Outdoor Motion Detectors have been developed and engineered
with the ultimate innovation - a Remote Control, which can be used by both
the installer and the home owner. The job can be completed faster by adjusting
the settings via Remote Control and setting the Detectors parameters - such as
time, lux and sensitivity. Then, by handing the Remote to the home owner,
you provide them with a new benchmark in lighting control, allowing them
to manage their security and safety at their convenience.


Installer Features

Time Settings

Time Settings

The timer can be set to pulse or set from 5 sec up to 30 min with the Remote Control.
Lux Level

Lux Level

Lux levels can be set between 5 and 1000 lux
Lux Learn

Lux Learn

With a press of this button the detector will learn the lux level at that given point in time.
Sensitivity

Sensitivity

The sensitivity is adjusted from 20% - 100%, according to the amount of movement detected.
Test Mode

Test Mode

Allows the installer to conduct sensor 'pick up' test. Any movement within the detection zone will trigger the Detector.
Lens Control

Lens Control

The evolution line of Motion Detectors have the convenience of de-activating or activating either the frontal or downward lens.
Keypad Lock

Keypad Lock

Lock the settings buttons while still maintaining the EASY homeowner settings.
LED Activation

LED Activation

This feature registers any movement, a particular benefit when the load has a failure.

Home Owner Features

Auto

Auto

Return to programmed settings with a push of this button
Holiday Mode

Holiday Mode

Holiday mode provides easy simulation of presence while out.
On

On/Off

Manipulate your surroundings with the easy on/off controls.
Off