0
No account yet register now
Email for contact

4 Module, Yearly & Weekly
Digital Time Switches

Hager's 4 Module Yearly & Weekly Digital Time Switches
offer the following:
  • Large display with programming guide
  • Quick connect terminals
  • 300 program steps (Basic weekly program,
    9 sub-programs, specific program step).
  • All events linked to a yearly cycle have been taken
    into account (easter function, day of the week function)
  • Input for external override
  • Hours counter on each channel
  • The output can be defined as ON, OFF, Impulse or cyclic.
  • Keyboard locking with PIN code

Product Range

The range is made up of 5 references :
ReferenceTypeNb of channels
Yearly
4
Yearly
2
Weekly
4
Programming Key
-
USB Programming interface
-
Programming Software
-

Characteristics

Programming

The program of the Yearly or Weekly Time Switch
is made up of four components:
  • Basic weekly program
  • 10 sub programs : a sub-program is a weekly program to be applied from date to date.
  • Specific program step : this is a complete program step defined by a time and a date.
  • Holidays.

Basic Weekly Program
This is a weekly program running permanently, (e.g. from Monday to Friday ON at 08h & OFF at 18h).

Specific Program Step
This is a program step defined by a time and a date, (e.g. ON at 07h on 25th of April).

Sub Programs
10 sub-programs allow definition of a weekly program and the period when this program must be applied, (e.g. from Monday to Saturday : 8h ON / 12h30 OFF/ 14h ON / 18h30 0FF – from 1st of March to 31st of April).

Holidays
to program permanent ON or permanent OFF during a period. (e.g. OFF from 1st of July to 31st of August).

Settings

Settings available on the time switch are:
  • Time and day setting
  • Automatic change summer/winter
  • Language (French, German, English, Italian, Spanish, Portuguese, Dutch)

Casing

  • 4 module width
  • Connection with Quick connect terminals.
  • 2 changeover and 2 NO contacts (10A-AC1)

Technical Characteristics

  • Supply: 230V +10 / - 15%
  • Frequency: 50/60Hz
  • Power consumption: < 2VA
  • Output: 2 changeover volt free contacts + 2 NO in the EG493E & EG403E
    2 changeover volt free contacts in the EG293B
  • Switching capacity: 10A – 250V AC1

Additional functions

Cyclic Operating
This function enables the user to program repeated cycles, i.e. xx minutes ON / xx minutes OFF. 4 different cycles can be defined. The length of the cycle (ON and OFF time) can be set from 1sec to 9h 59min 59s.

Hour Counter
An hour counter is assigned to each output. It will count the ON switching time and the number of switchings. It will also count the clock running time. These counters are not resettable.

Keyboard Locking via PIN Code
A PIN code can be defined and activated. Once activated, the keyboard is automatically locked after 2 minutes without any action. The user will need the PIN code to unlock the keyboard. This PIN code can be cancelled or modified. A master PIN code will be given to hager (available by the quality department).

External Override Input Setting
This input is to be connected to a pushbutton or a switch (230V +10%, -15%). Available functions are : changeover, permanent ON/OFF, random, timer ON. In the settings menu, the function of the input and the channels concerned can be defined, (example : Timer ON during 1h 45 min on Channel A and C).

Random
In this override mode, to simulate a presence, each program step is randomly shifted by +/- 59 minutes.

Programming Key

The programming key of the Yearly and Weekly Time Switch is a specific reference : EG007 (high capacity 64kByte).

Time Switch reference : EG493E & EG403E will be delivered with one programming key.

Key's functions are :
  • load: save to the time switch, the program that's in the key.
  • save: save to the key, the program that's in the time switch.
  • read: check the program steps in the key's memory.
  • override: apply the key program as long as the key is plugged in.