New

RCBO Electronic 1M 1P 6kA C-25A 30mA A ADA125T

EAN
3250611067696
Packaging
1 Piece

Technical properties

Architecture
  • Neutral position
    right
  • Number of protected poles
    1
  • Number of poles
    1 P
  • Type of pole
    1 P
  • Fixing mode
    DIN rail type O (symmetrical)
  • Curve
    C
Configuration
  • Number of modules
    1
Connectivity
  • Top connection alignement for modular devices
    Shifted terminal
  • Bottom connection alignement for modular devices
    Aligned terminal
Main electrical features
  • Rated operational voltage Ue
    230 / 240 V
  • Type of supply voltage
    AC
Voltage
  • Rated insulation voltage
    250 V
  • Max operating voltage
    253 V
  • Rated impulse withstand voltage
    4000 V
Electric current
  • Rated residual operating current
    30 mA
  • Rated current
    25 A
  • Withstand not tripping on 8-20 μs wave
    3 kA
  • Breaking and opening capacity
    6 kA
  • min/maxi threshold value of the AC thermal operation
    1.13 / 1.45 In
  • Magnetic regulating currrent
    5 / 10 In
Electric current / temperature
  • Rating current -25°C
    31.35 A
  • Rating current -20°C
    30.83 A
  • Rating current -15°C
    30.3 A
  • Rating current -10°C
    29.76 A
  • Rating current -5°C
    29.2 A
  • Rating current 0°C
    28.64 A
  • Rating current 5°C
    28.07 A
  • Rating current 10°C
    27.48 A
  • Rating current 15°C
    26.88 A
  • Rating current 20°C
    26.27 A
  • Rating current 25°C
    25.64 A
  • Rating current 30°C
    25 A
  • Rating current 35°C
    24.34 A
  • Rating current 40°C
    23.66 A
  • Rating current 45°C
    22.96 A
  • Rating current 50°C
    22.24 A
  • Rating current 55°C
    21.5 A
  • Rating current 60°C
    20.73 A
Current correction factors
  • Correction factor of rating current for 2 devices placed side-by-side
    1
  • Correction factor of rating current for 3 devices placed side-by-side
    0.95
  • Correction factor of rating current for 4 and 5 devices placed side-by-side
    0.9
  • Correction factor of rating current for 6 devices placed side-by-side
    0.85
Dimensions
  • Depth of installed product
    70 mm
  • Height of installed product
    115 mm
  • Width of installed product
    17.5 mm
Frequency
  • Frequency
    50 Hz
Power
  • Total power loss under IN
    6.9 W
  • Power loss per pole at In
    3.6 W
Endurance
  • Electric endurance in number of cycles
    2000
  • Number of mechanical operations
    4000
Installation, mounting
  • Type of top connection for modular devices
    with screw
  • Type of bottom rail clip for modular devices
    metallic isolated
  • Type of Bottom Connection for modular devices
    BIconnect
  • Top removability for modular devices
    No
  • Bottom removability for modular devices
    No
  • Suitable for flush-mounting
    Yes
Connection
  • Connection cross-section at output with screw, for flexible conductor
    1 / 16 mm²
  • Connection cross-section at output with screw, for massive conductor
    1 / 25 mm²
  • Connection cross-section for rigid conductor, upstream terminals with screws
    1 / 16 mm²
  • Connection cross-section of the access with screws, with flexible conductor
    1 / 10 mm²
  • Downstream cage clamp delivery status
    opened
  • Upstream cage clamp delivery status
    opened
Cable
  • Length of conductors used for the heating test (m) according to product standard
    1 m
  • Conductor cross-section used for heating test(mm²) according to product standard
    4 mm²
Equipment
  • Can be accessorized
    No
  • With transparent product label holder
    No
Standards
  • European directive WEEE
    concerned
Safety
  • Protection index IP
    IP20
  • Residual current type
    A
Use conditions
  • Operating temperature
    -5…60 °C
  • Degree of pollution according to IEC 60664 / IEC 60947-2
    2
  • Class of energy limitation I²t
    3
  • Altitude
    2000 m
  • Air humidity protection
    Execution II
  • Storage/transport temperature
    -25…60 °C
temperatur
  • Temperature of calibration
    30 °C
  • Ambient air temperature during heating test according to the product standard
    22.8 °C
  • Max. admissible temperature on accessible parts (intended to be touched)
    57.2 °C
  • Max. admissible temperature on accessible parts (manual operating means)
    49.6 °C
  • Max. admissible temperature on access. parts (not touched for normal operation)
    68.2 °C
  • Max. admissible temperature on terminals
    64.2 °C
  • Temp.-rise limits for access. parts (toggle) according to product standard
    25 K
  • Temp.-rise limits for access. parts (not touched) according to product standard
    60 K
  • Temp.rise limits for access. parts (to be touched) according to product standard
    40 K
  • Temperature-rise limits for terminals according to the product standard
    65 K
  • Temperature-rise measured on accessible parts at In (manual operating means)
    9.6 K
  • Temperature-rise measured on access. parts at In (not touched normal operation)
    28.2 K
  • Temperature-rise measured on accessible parts at In (intended to be touched)
    17.2 K
  • Temperature-rise measured on terminals at In
    24.2 K

Downloads

  • Product image

    Image ADA125T  | Hager Australia

    Product Image ADA125T

  • ProductNotice

    Image Notice RCBO GB  | Hager Australia

    Notice RCBO GB

    PDF
    153 KB
  • ProductDataSheet

    Image ADA1xxT Product Data and Technical Specification  | Hager Australia

    ADA1xxT Product Data and Technical Specification

    PDF
    112 KB
  • ProductECDeclaration

    Image Declaration  | Hager Australia

    Declaration

    PDF
    129 KB
  • ProductROHS

    Image RoHS certificate for ADA125T  | Hager Australia

    RoHS certificate for ADA125T

    PDF
    33 KB
    Image RoHS certificate for ADA125T  | Hager Australia

    RoHS certificate for ADA125T

    PDF
    33 KB
More documentation