Old Articles / TE370

TE370

3Ph Kwhmeter via CT KNX output

Cat. Ref.:	TE370
EAN No.:	3250615853707

This product is not sold any longer.

This page, however, remains available for information purposes. Please contact your wholesaler in order to find appropriate follow-up products.

Old Article: TE370 Follow-Up Articles:

Technical Characteristics

close all

Architecture

Bus system:

KNX

Functions

Precision class:	1%
Tariff switch:	no
Power and energy consumption measurement
Total output and total power consumption measurement
Reset for partial meter per input
Partial and total meter per recording
Recording of the total power/consumption figures
Tariff switching via 1-byte or 1-bit object

Configuration

flashing counter channel LED (0.1 Wh/pulse x transformer ratio)

Controls and indicators

LC display with illumination
with a manual operation button for scrolling through the values
with reset button
with programming button for adjusting the maximum converter primary current and power supply type

Connectivity

Bus system radio frequent:	no
Bus system LON:	no
Bus system Powernet:	no

Main electrical features

Frequency:

50/60 Hz

Voltage

Operating voltage:	230/400 V~ +/- 15%
Operating voltage over bus:	21…32 V DC

Electric current

Bus current consumption (data transfer):	8 mA
Making current:	10 mA
Reference current:	5 A
Max. measurement circuit current:	5 A

Power

Power consumption measuring element:	per phase max. 2,8 VA
Total power loss under IN:	2 W

Measurement

Idle power measurement:

YES

Dimensions

Width of rail mounted device (RMD):

4 modules

Connection

Conductor cross-section (flexible):	1…6 mm²
Conductor cross-section (rigid):	1,5…10 mm²
Type of connection:	direct
with connecting terminal for tariff input (HT/NT)
with 3-phase mains connection terminal
3 connecting terminals for current transformers
with integral bus coupling unit
with screw terminals
bus connection via connecting terminal