Easy - Relays
10A Relays
- Operating voltage via bus: 21 to 32 V DC
- Frequency: 50/60 Hz
- Switching current at cos DC 0.8: max. 10 A
- 230 V LED bulbs: 12 x 23 W
- Energy saving lamps: 12 x 23 W
- 230 V incandescent / halogen light: 1200 W
- Conventional transformers: 1200 VA
- Electronic transformers: 1000 W
- Fluorescent lamps with electronic ballast: 15 x 36 W
- For switching an independent load per actuator channel or actuation of a blind drive via two actuator channels
- Any combined operation from drive and switching functions is possible
- Manual operation can be activated via selector switch, thereby deactivating the KNX function
- Manual operation per channel via button (single-surface operation)
- With illuminated programming button
- Status LED integrated in the manual control button
- With positioning function for blind and slat position
- With safety functions eg for wind, rain, alarm
- Large labelling field
- For switching various external conductors
- With integrated bus coupler
- Bus connection via connection terminal
- With QuickConnect plug-in terminals
For switching independent loads or for controlling drives.
16A Relays for Capacitive Load
- Operating voltage via bus: 21 to 32 V DC
- Frequency: 50/60 Hz
- Switching current at cos φ = 0.8: max. 16A
- 230 V LED bulbs: 18 x 23 W
- Energy saving lamps: 18 x 23 W
- 230 V incandescent / halogen light: 2300 W
- Conventional transformers: 1600 VA
- Electronic transformers: 1200 W
- Fluorescent lamps with electronic ballast: 20 x 36 W
- For switching an independent load per actuator channel or actuation of a blind drive via two actuator channels
- Any mixing operation from drive and switching functions is possible
- Manual operation can be activated via selector switch, thereby deactivating the KNX function
- With illuminated programming button
- Status LED integrated in the manual control button
- With positioning function for blind and slat position
- With safety functions eg for wind, rain, alarm
- Large labelling field
- For switching various external conductors
- With integrated bus coupler
- Bus connection via connection terminal
- With QuickConnect plug-in terminals
Follow the motor manufacturers' instructions.
For switching independent loads or for controlling drives.
10A Relays, 1 Gang, Flush Mounted
- Operating voltage via bus: 21 to 32 V DC
- Max. Switching capacity at: 230 V AC
- Frequency: 50/60 Hz
- Switching current at cos φ = 0.8: max. 10 A
- Current consumption KNX: typ. 7 mA
- Conventional transformers: 600 VA
- Dimensions (wxhxd): 44x22.5x43mm
- Status LED integrated in manual control button
- With illuminated programming key / manual operation key
- With potential-free NO contact
- Can be installed in flush-mounted or water-proof junction box
- Bus connection via prefabricated cable with bus connection terminal
- With screw terminals
- With integrated bus coupler
Cat. Ref. | Description | ex. GST | inc. GST | |||
---|---|---|---|---|---|---|
TXB601B | Output module 1x 10A /230V~, flush, KNX | 189.73 $ / pc. | 208.70 $ / pc. |
*All data is subject to errors and technical modifications. All prices are recommended retail prices.